Product detailed description

Why is the UNIQUE PRO UV lamp a gamechanger?

With classic lash extensions, the polymerization of the lash adhesive happens gradually and can be influenced by several factors, including ambient temperature and relative humidity.

The UV lash system changes the way a stylist works with the moment of curing.

After the artificial eyelashes are correctly positioned, the stylist activates the lamp with a foot pedal, and the compatible UV adhesive cures under the light in approximately 1–3 seconds.

This gives the stylist control over when the bond cures.

UV Lash System and Controlled Curing in 1–3 Seconds

UNIQUE PRO uses UV LED light with a wavelength of 395–400 nm and a power output of 3 W.

After applying the artificial eyelashes, the stylist activates the light with a foot pedal to precisely illuminate the created bond. The UV lash adhesive then cures in approximately 1–3 seconds.

Fast curing allows the application to continue without long waiting times for the previous bond to stabilise.

Reduced dependence on temperature and humidity in the salon

One of the greatest advantages of UV technology is a more controlled curing process for compatible UV adhesive.

With classic lash adhesives, the stylist must monitor the working conditions recommended by the manufacturer, as changes in temperature and humidity can affect the polymerization speed.

With the UV system, the activation of the compatible adhesive by UV light is decisive, making the process less dependent on the fluctuations of standard salon conditions.

Faster and smoother lash workflow

Instant, controlled curing of the bond can significantly simplify the lash stylist's workflow.

Once cured, you can continue the application even on adjacent eyelashes without needing to wait for the previous bond to cure further. This helps reduce unwanted sticking between eyelashes or the closing of created volume fans.

With the correct technique, the UV system can shorten the total application time by approximately 15–30 minutes.

Actual time savings depend on the technique, the stylist's experience, the type of application, and the workflow.

Consistent bond with every application

With UV lash technology, the stylist activates the curing themselves the moment the artificial eyelashes are correctly positioned.

This provides greater control over the workflow and allows for the creation of consistent bonds without needing to rely solely on the natural polymerisation process of classic adhesive.

However, the resulting retention always depends on the correct preparation of natural eyelashes, the amount of adhesive, the application technique, the contact area, subsequent aftercare, and the individual characteristics of the client.

Do I need a bonder or booster with a UV lash system?

When working with a suitable UV lash adhesive, there is no need to use a bonder or booster solely to speed up the curing of the bond – this process is handled by the UV light.

However, always adapt your specific workflow to the combination of products used and the UV adhesive manufacturer's recommendations.

Less time with uncured adhesive

In a classic lash system, the polymerisation of the adhesive continues even after the bond is formed. With the UV system, the adhesive is targetedly cured by light during application.

This means a shorter time during which the applied UV adhesive remains uncured.

However, UV technology does not mean zero risk of an allergic reaction. UV lash adhesives still contain reactive components, and a reaction may occur in sensitive or allergic individuals.

No classic waiting time after application

After the UV adhesive is correctly cured by the light, the bond is formed during the application itself.

The client therefore does not need to follow the classic recommendation to avoid water or increased humidity solely to allow the adhesive to continue curing.

For aftercare, it is always necessary to follow the recommendations of the specific UV adhesive manufacturer and the principles of proper lash aftercare.

Designed for the daily work of a lash stylist

UNIQUE PRO is not just a UV light source. The lamp design is engineered to fit comfortably into the workspace next to the lash bed.

Foot pedal control

You activate the UV light using a foot switch, so you don't have to release your tweezers or interrupt your manual work during the Application.

Adjustable light focus

The adjustable lens allows you to modify the beam width and direct the UV light more precisely onto the working area.

Long adjustable arm

The articulated arm with a reach of up to 100 cm allows the lamp position to be adapted to the lash bed and the stylist's working posture.

The total height of the lamp is adjustable in the range of approximately 110–180 cm.

Mobile base on wheels

A stable base with wheels makes it easy to move the lamp between workstations. The wheels can be locked for stable positioning during application.

Long-life LED

The declared lifespan of the LED light source is up to 55 000 hours, making UNIQUE PRO a device designed for long-term professional use.

Main advantages of UNIQUE PRO

• professional UV lamp for eyelash extensions
• designed for curing compatible UV lash adhesive
• bond curing in approximately 1–3 seconds
• UV LED 395–400 nm
• LED power 3 W
• greater control over the adhesive curing moment
• reduced dependence of curing on common temperature and humidity changes
• possibility of a more efficient professional workflow
• potential saving of approximately 15–30 minutes of application
• adjustable light focus
• foot pedal control
• adjustable arm with a reach of up to 100 cm
• adjustable height 110–180 cm
• mobile base with wheels
• LED lifespan up to 55 000 hours
• professional salon use

Technical parameters

Material: metal + aluminium
LED Power: 3 W
Wavelength: 395–400 nm
Adapter Input: 100–260 V
Control: foot pedal
LED Lifespan: up to 55 000 hours
Lamp Height: 110–180 cm
Arm Reach: up to 100 cm
Base Diameter: 80 cm
Recommended distance from eyelashes: approximately 15–50 cm
Approximate total UV exposure time per client: approximately 300 seconds
Colour: black / white
Use: professional UV eyelash extensions

Safe work with the UV lash lamp

UNIQUE PRO is a professional device, and when working with the UV lash system, it is necessary to follow the correct procedure and safety instructions.

During application, we recommend using appropriate eye protection designed for the UV light wavelength used and minimising unnecessary skin exposure outside the working area.

Use the lamp only with compatible products designed for UV lash technology and according to the instructions for use.

FAQ – UNIQUE PRO UV Lamp

How does the UV lamp for eyelash extensions work?

The stylist applies an artificial eyelash using a compatible UV lash adhesive and activates the UV lamp once correctly positioned. The light triggers rapid curing of the adhesive and stabilises the created bond.

How quickly does UNIQUE PRO cure UV lash adhesive?

With correct use, the bond is cured in approximately 1–3 seconds.

What wavelength does UNIQUE PRO have?

The UV LED operates at a wavelength of 395–400 nm.

Does the UV lash system work independently of humidity?

The UV system is less dependent on changes in relative humidity and temperature than classic lash adhesives during curing, as the process is specifically activated by UV light. However, the working conditions of the specific UV adhesive must always be followed.

Can the UV system speed up the application of eyelashes?

Yes. Rapid curing of individual bonds can speed up the working process. The declared saving is approximately 15–30 minutes, while the actual time depends on the stylist's experience and the type of application.

Do I need a special adhesive for the UV lamp?

Yes. Yes. UNIQUE PRO must be used with a compatible UV lash adhesive designed to cure at the corresponding wavelength of light. A regular lash adhesive is not automatically a UV adhesive.

Does the UV lash system prevent adhesive allergies?

No. UV lash technology does not rule out the possibility of an allergic reaction. UV lash adhesives also contain ingredients to which the client or stylist may be sensitive.

Does the client need to wait before contact with water after a UV application?

The UV adhesive is targetedly cured during the application, so there is no need to wait for further curing solely for water contact. However, subsequent aftercare should always follow the recommendations of the adhesive manufacturer.

Is it necessary to use protective eyewear with a UV lash lamp?

When working professionally with UV light, we recommend using protective eyewear suitable for the wavelength being used and following the safety instructions for the device.