Wowbyme UV adhesive Unique Pinky 5ml

UV adhesive UNIQUE Pinky by Wowbyme brings a combination of professional performance and modern visuals. The pink color makes it a striking, Instagram-friendly product that will liven up your desk - without compromising on quality.

Adhesive is suitable for both UV and LED systems, and cures only after activation with light. This gives you enough time to accurately position eyelashes before fixing.

Why choose UNIQUE Pinky?

✅ Suitable for both UV and LED systems
✅ Curing time – 1 second
✅ Medium viscosity – controlled microdroplet
✅ Pink color – better visual control during application
✅ Without PTO (p-toluenesulfonate / toluene derivatives)
✅ Retention until natural hair loss eyelashes

WOWBYME adhesives designed for the UV system do not contain PTO - substances that can be found in some competing products and are considered potentially irritating. The composition is designed to be as gentle as possible on the eyes, skin and respiratory tract.

Product complies with EU quality and legislative standards (CLP, REACH).

Technical parameters

• Curing time: 1 second (light activated)

• Viscosity: medium

• Color: pink

• Consumption after opening: 1–2 months

• Bond durability: until natural eyelashes falls out

Proper storage = stable performance

Before first use, let the adhesive acclimatize to room temperature for several hours to ensure proper polymerization.

Store after opening:

• at a stable temperature of 18–23 °C

• in a dry place

• away from direct sunlight and heat sources

• ideally in an airtight or vacuum box

The Adhesive reacts with air humidity, and sudden temperature changes can affect its quality.

Wowbyme ensures a rapid turnover of stock so that you always work with fresh product.

Usage

1️⃣ Preparation

Clean with eyelashes cleaning foam, rinse with water, dry and degrease with primer.

2️⃣ Application

• Dip the false eyelash into a microdrop of glue.

• Place on isolated natural lash.

• You have time to accurately adjust the position before activation.

3️⃣ Fixation

Press the UV lamp pedal for 1-2 seconds to cure the bond to 100%.

Application "eyelash next to eyelashes" increases work efficiency and can speed it up by up to 30 minutes.

Removal during refilling is done classically using tweezers.

Care of adhesive

• Store in a vacuum container

• Drip onto a matte and opaque surface

• Do not expose to direct sunlight.

• Use a spare teat, non-textile wipes and a storage box

eyelashes adhesives are professional products sensitive to storage and environmental conditions. Once opened and used, they cannot be returned for hygiene and safety reasons. A complaint is only possible in the event of a demonstrable manufacturing defect.