UV Adhesive Unique Black 5ml

Wowbyme adhesives intended for the UV system do not contain PTO (p-toluene sulfonate / toluene derivatives) – these are substances that can be found in some competing products and are considered potentially irritating. Our formula is designed to be as gentle as possible on eyes, skin, and breathing.

Before first use, let the adhesive acclimatize to room temperature for several hours. This ensures proper polymerization and optimal adhesion.

After opening, always store the adhesive in a dry place at a stable room temperature, ideally between 18 and 23 °C. Keep it away from direct sunlight and heat sources, and always seal it thoroughly after each use, ideally store in an airtight box. If the adhesive is exposed to sudden temperature changes, coming from the cold or, conversely, from an overheated environment, irreversible damage to the adhesive may occur after opening. It reacts immediately with air moisture, and the difference between the ambient temperature and the temperature of the adhesive itself can affect its quality.

Our brand ensures a fast turnover of stock, so you are always working with a fresh and full-value product.

The first black UV adhesive on the market – a revolution from WOWBYME!

Introducing the first black UV adhesive on the marketthat pushes the boundaries of lash technology! WOWBYME once again brings an innovation that changes the rules of the game in the lash industry.

✅ Maximum durability and strength – Rapid polymerization under UV light ensures extreme durability and long-lasting joints.
✅ Minimizing fumes – UV adhesive significantly reduces eye irritation and is gentler on both customers and lash artists.
✅ Deep black color – The perfect combination for an intense effect and a distinctive look. Practical application even for the lash stylist herself.
✅ A new era of safety and precision – Control over the curing process allows for flawless application and the elimination of sticky joints.

Be among the first to experience the future of lash extensions! WOWBYME is setting the trend – are you ready to be part of this revolution? 🚀

Drying time: 1 second

Durability: until natural eyelashes falls out

Viscosity: medium

Color: black

Use within: 1-2 months after opening

We recommend storing in a vacuum container.

Place a drop of glue on a matte and opaque surface and do not expose it to direct sunlight.

Use accessories suitable for adhesive care - replacement nozzle for adhesive, non-textile wipe for adhesive or storage box - to ensure the most suitable conditions and improve the lifespan of your adhesive.

APPLICATION:

Before application, first clean the face and eye area with CLEANSING FOAM and then rinse with water. Dry and degrease with Primer. Proper eyelash preparation is the foundation for good retention.

Dip the artificial eyelash into the adhesive, pick up the required amount of adhesive in a so-called micro-drop, and apply it to the separated natural eyelash. A great feature of UV adhesive is that you have the necessary time to correctly position the applied eyelash until you press the foot pedal. Therefore, this adhesive is versatile and suitable for both beginner and advanced lash artists.

By pressing the UV lamp's foot pedal for 1-2 seconds, you will cure the adhesive 100% and can move on to the next eyelash. The ideal application method is eyelash by eyelash; you don't need to waste time jumping from eye to eye and searching for free eyelashes. This will increase your work efficiency and speed it up by up to 30 minutes.

Removing eyelashes before refilling is done using tweezers as usual.

The product complies with the quality and legislative standards of the European market.

EU CLP - Regulation (EC) No 1272/2008

REACH Regulation (EC) No 1907/2006

Commission Regulation (EU) 2020/878