UV Adhesive Unique 5ml

Wowbyme adhesives for UV system do not contain PTO (p-toluenesulfonate / toluene derivatives) – these are substances that may be found in some competing products and are considered potentially irritating. Our formula is designed to be as gentle as possible on eyes, skin, and breathing.

Before first use, let the adhesive acclimatize to room temperature for several hours. This ensures proper polymerization and optimal adhesion.

After opening, always store the adhesive in a dry place at a stable room temperature, ideally between 18 and 23 °C. Keep it away from direct sunlight and heat sources, and always seal it thoroughly after each use, ideally store in an airtight box. If the adhesive is exposed to sudden temperature changes, coming from the cold or, conversely, from an overheated environment, irreversible damage to the adhesive may occur after opening. It reacts immediately with air moisture, and the difference between the ambient temperature and the temperature of the adhesive itself can affect its quality.

Our brand ensures a fast turnover of stock, so you are always working with a fresh and full-value product.

Drying time: 1 second

Durability: until natural eyelashes falls out

Viscosity: medium

Color: clear

Use within: 1-2 months after opening

We recommend storing in a vacuum container.

Place a drop of glue on a matte and opaque surface and do not expose it to direct sunlight.

Use accessories suitable for adhesive care - replacement nozzle for adhesive, non-textile wipe for adhesive or storage box - to ensure the most suitable conditions and improve the lifespan of your adhesive.

APPLICATION:

Before application, first clean the face and eye area with CLEANSING FOAM and then rinse with water. Dry and degrease with Primer. Proper eyelash preparation is the foundation for good retention.

Dip the artificial eyelash into the adhesive, pick up the required amount of adhesive in a so-called micro-drop, and apply it to the separated natural eyelash. A great feature of UV adhesive is that you have the necessary time to correctly position the applied eyelash until you press the foot pedal. Therefore, this adhesive is versatile and suitable for both beginner and advanced lash artists.

By pressing the foot pedal of the UV lamp for 1-3 seconds, you will cure the adhesive 100% and can proceed to the next lash. The ideal application method is eyelash by eyelash; you don't need to waste time jumping from eye to eye and searching for free eyelashes. This will increase your work efficiency and speed it up by up to 30 minutes.

Removing eyelashes before refilling is done using tweezers as usual.

FAQs – UV UNIQUE Adhesive 5 ml

1. How long does UV adhesive take to cure?
   "With the correct UV lamp, one second (1 s) is sufficient, the adhesive cures instantly with light."

2. Is this adhesive safe for sensitive eyes?
   "Yes — the adhesive does not contain PTO, fumes are minimal, and with the correct application technique, the risk of irritation is reduced."

3. Can I use the adhesive after the minimum expiry date?
   "The manufacturer guarantees quality until the indicated date; after that, we cannot guarantee quality, so we recommend using it sooner."

4. What UV lamp does this adhesive work with?
   "Optimally with 395–405 nm LEDs, such as UNIQUE lamps, but also other compatible UV devices."

5. How to extend the life of an opened adhesive?
   "Store it in a dark, cool environment; using a replacement nozzle and deactivating air (vacuum containers) helps extend its effectiveness."